Weather-resistant finishes that protect your home from Florida's heat and humidity while boosting curb appeal.
Florida is hard on paint. UV fades color, afternoon storms drive moisture into every crack, humidity feeds mildew, and near the coast salt air eats at any finish that wasn't applied over properly prepared surfaces. The difference between an exterior paint job that lasts 3 years and one that lasts 10 is preparation and product.
That's why we pressure wash every exterior, repair and caulk before painting, prime bare or chalky areas, and use 100% acrylic latex exterior paints from Sherwin-Williams and Benjamin Moore formulated for UV, mildew and salt resistance.
Removes dirt, mildew, chalking and loose paint.
Of peeling or failing areas.
Around windows, doors, trim and expansion joints.
Stucco cracks, damaged wood trim and rotted fascia. Larger repairs are quoted separately.
Of bare wood, patched stucco and chalky surfaces.
Premium exterior paint, applied for full coverage.
Trim, fascia, soffits, shutters, doors and garage doors, in a contrasting or matching color.
Landscaping, driveways and walkways protected and cleaned.
We walk the entire exterior with you, note repairs and moisture issues, and quote in writing within 24 hours.
Pressure wash, dry time, scraping, caulking, repairs, priming.
Body first, then trim and accents. Two coats, back-rolled on stucco for full coverage.
We inspect with you in daylight, touch up, and clean the site.
Most single-family exteriors take 3 to 6 days depending on square footage, prep needs and weather. Florida's afternoon rain can affect drying time, so we schedule carefully and communicate timelines upfront.
Lighter colors reflect heat and fade less in Florida sun. Darker colors look sharp but need higher-quality paint to hold up. We bring large samples, paint test patches on the sun-facing side of your home, and check any HOA color requirements before we start.
See our exterior painting pages for Palm Coast and Flagler County and the Jacksonville area.
